Peltier DYI Holder

Fixing the hot and the cold sides of a PELTIER element with springs and 40x40mm ALU-profiles. Flexible seal is used to tighten the gap between the hot and the cold sides.
40x40mm fan is proposed to blow on the cold side. 80mm or 120mm fans are prepared to cool down the peltier element hot side.
The fan adapters are included.
The springs are about 20-25 mm long, 10mm outside, 8mm inside diameter
For the seal between the tubes and the ventilators use: https://www.thingiverse.com/thing:3879982