Quicycle motor hand tool
by pabloalvarez
5
Downloads
6
Likes
0
Makes
Hand tool for quicycle motor.
Tested at PLA, no raft, 0.3, 100% infill.
Better results on PLA 870 >95% infill crystalized.
Additional parts needed
3 screws DIN 963/965 M5 5x12mm
rubber mallet
VERY IMPORTANT: If your goal is to grease the motor gearbox NEVER USE LITHIUM OR GRAPHITE GREASE, this will destroy the seals and damage the plastic gears. Use a small quantity of PFE(Teflón) or Silicone Grease instead.
Tested at PLA, no raft, 0.3, 100% infill.
Better results on PLA 870 >95% infill crystalized.
Additional parts needed
3 screws DIN 963/965 M5 5x12mm
rubber mallet
VERY IMPORTANT: If your goal is to grease the motor gearbox NEVER USE LITHIUM OR GRAPHITE GREASE, this will destroy the seals and damage the plastic gears. Use a small quantity of PFE(Teflón) or Silicone Grease instead.
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in