CR-10S_Pro_Filament_holder

I wanted a filament holder to mount on the original metal holder from Creality. All you need is 2 normal ball bearings with 8mm inner diameter, 22mm outer diameter and 7mm width, as well as an M8 threaded rod with about 126mm length to screw the whole thing. On the front you need an M8 metal nut (plastic did not stand it) and a washer. On the back side, the "Axis_locking_screw_part2" is used as counter-screw, which can also be tightened with a coin or a large screwdriver. The firmer this screwin