Thingiverse
Raspberry Pi 7" Touchscreen Wall Mount
by oklahsam
56
Downloads
35
Likes
0
Makes
Designed this mount in Fusion 360.
It is modeled to fit the Official 7" display and mount it to a 3 gang wall box.
The frame attaches to the display using M3 screws, and the screw to lock it in place is an M2. There's a slot on the bottom mount for an M2 nut, but the holes are tight enough you could probably do without it.
I'm using a POE to ethernet / microUSB splitter to power mine and connect it to the network. Right angle adapters are definitely required, unless you don't attach the P
It is modeled to fit the Official 7" display and mount it to a 3 gang wall box.
The frame attaches to the display using M3 screws, and the screw to lock it in place is an M2. There's a slot on the bottom mount for an M2 nut, but the holes are tight enough you could probably do without it.
I'm using a POE to ethernet / microUSB splitter to power mine and connect it to the network. Right angle adapters are definitely required, unless you don't attach the P
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in