3D Glasses Frames

These are Frames for 3D Movie Glasses, they are designed to fit on most nose (tested with 3 people) and to be slightly comfortable. I designed these so I can make 2D Glasses for 3D films however they will work as regular 3D Glasses.

What you will need to Complete this project:

- 1 Set of 3D Glasses (2 if you want 2D Glasses)
- Knife/Pliers so you can remove the lenses of the 3D Glasses
- Hot/Super Glue to glue the front and rear of the glasses together.

Step 1:
Print the Front and rear of the Glasses there are little alignment tabs to ensure they stay aligned.

Step 2:
Remove the Arms from the glasses you can attach these to the back of the glasses once they are glued to the front.

Step 3:
Remove the Lens from the glasses. There is a seam starting from the arm holes, take a knife or pliers into it and separate the front and back of the 3D Movie glasses. Once a gap has been created you can just rip the back off of the glasses and the lenses will just be sitting there