Slicer Discord
3D Print Thickness Tester – 3D-printbaar model van MakerWorld MakerWorld
Other Tools

3D Print Thickness Tester

28 Downloads
3 Likes
13 Makes
Model downloaden
This 3D Print Thickness Tester is a handy tool to use when you are designing a 3D model and are trying to decide how thick a given feature should be. Not sure if 1.0mm walls will be thick enough for the strength your part needs? Use the 3D Print Thickness Tester! Not sure if 0.6mm is too rigid for your living hinge? Use the 3D Print Thickness Tester! Not sure if your magnet will work properly through 0.8mm of material? Use the 3D Print Thickness Tester! The 3D Print Thickness Tester has an overall size of 240mm by 40mm and consists of 12 connected tiles that are each 20mm wide by 40mm tall with varying heights of 0.2mm, 0.4mm, 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.4mm, 1.6mm, 1.8mm, 2.0mm, 3.0mm, and 4.0mm. All tiles are labelled with their thickness, and the included 3MF slicer files add text to identify the type of filament used for the 3D Print Thickness Tester (PLA and PETG 3MF files provided for PrusaSlicer). Requires AMS for different colored numbers! The provided STL files can be printe
Categorie
Other Tools
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid
Waarom?
2 kleuren
Eendelig 2 kleuren / AMS Hardware nodig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 1/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA, PETG
Kleuren
2 (AMS/MMU aanbevolen)
Nabewerking
Hardware
Software
Cura, PrusaSlicer of vergelijkbaar
Zelfde ontwerper, meer platforms

Phil Caruso publiceert ook op

92 extra modellen op 1 andere platforms

Geverifieerd door overeenkomende modeltitels op platforms.
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie