Thingiverse
3D Printable Priezor
por oldmogy
2
Descargas
0
Likes
0
Makes
3D Printable Priezor Frame
This will be of interest to Sound Designers/Audio Engineers.
I've recreated the LOM Instruments Priezor Magnetic Field Sensor in a 3D printable form and included space in handle for a preamplifer that converts the signal into a balanced output that can go straight into an XLR input with phantom power.
The CAD drawings live in Onshape and are publicly available, so you can copy the design and modify for your needs.
Link to OnShape CAD: https://cad.onshape.com/documents/c9de1e5d51e288cd6e75f973/w/5c5ef30f6346f513a01dc1eb/e/11ad490397a594f16431bad1?renderMode=0&uiState=6722258d9f8410217d502d49
Hardware Notes:
All screws are M3. The lengths are 18mm for the antenna frame, and 25mm for the handle.
The wire I used (0.4mm enabled copper wire) was left over from other projects and provided enough for 100 turns.
The model was printed at 100% and I've made allowances for 3D print tolerances for my Ender 5.
I printed this in ASA until I ran ou
This will be of interest to Sound Designers/Audio Engineers.
I've recreated the LOM Instruments Priezor Magnetic Field Sensor in a 3D printable form and included space in handle for a preamplifer that converts the signal into a balanced output that can go straight into an XLR input with phantom power.
The CAD drawings live in Onshape and are publicly available, so you can copy the design and modify for your needs.
Link to OnShape CAD: https://cad.onshape.com/documents/c9de1e5d51e288cd6e75f973/w/5c5ef30f6346f513a01dc1eb/e/11ad490397a594f16431bad1?renderMode=0&uiState=6722258d9f8410217d502d49
Hardware Notes:
All screws are M3. The lengths are 18mm for the antenna frame, and 25mm for the handle.
The wire I used (0.4mm enabled copper wire) was left over from other projects and provided enough for 100 turns.
The model was printed at 100% and I've made allowances for 3D print tolerances for my Ender 5.
I printed this in ASA until I ran ou
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!