Thingiverse

3D Printed Brushless Motor

by lynce9956

82 Downloads

78 Likes

0 Makes

This is a 3D printed brushless motor I designed and built.

Warning: This motor has not been proven to be safe...Make at your own risk.

Videos:
https://youtu.be/CvqtIPmJHl8 (Test)
https://youtu.be/e2LfLguXA-4 (Build)
https://youtu.be/UwEQf9Ki4E0 (Design)

Parts List:
1x Carriage Bolt 5/16x5 in.
10x Nuts 5/16 in.
6x Bolts 1/4x1-1/4 in.
12x Nuts 1/4 in.
6x 26AWG Magnet Wire 15 ft.
8x Neodymium Magnets 6x6x12 mm (arranged NSNS...)
2x Skateboard Bearing
1x 3D Printed Rotor
1x 3D Printed Stator
1x 3D Printed Bearing Holder
1x 3D Printed Base
1x Hobbywing Skywalker 20A ESC

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format