Dragon Statue

Let me introduce you to the Dragon. This is not a model for beginners in 3D printing. It’s going to take a long time to print, it’ll need a ton of support removal… but the result is totally worth it!If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier that suits you.[ Suggested Print Setup for 20cm figurine ]Nozzle: 0.4mmLayer Height: 0.2mm ( You can adjust the layer height based on how much detail you want )Infill: 5%Wall loops: 3Supports: Tree (auto) / Angle 35Printed with: BambuLab PLA Matte Charcoal - Painted with Metallic PaintThese photos are real and show an actual 3D-printed figure photographed by me.As always!The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament, and everything should be fine.