Thingiverse
3D-printed pet robot
door ilyao
5
Downloads
2
Likes
0
Makes
Meet Snoopy, an open-source 3D-printable DIY Arduino-based pet robot!
Snoopy was designed in Fusion 360 and printed using a Voron 2.4r2 350mm and a Prusa MK3S. It has an ESP32 micro-controller, Arduino firmware, two motors with a caster, a laser scanner sensor (and in a next revision a Raspberry Pi Pico with servos). It has an old smartphone or 7" tablet as display, microphone, audio and IMU.
Instructions and up-to-date files are available here https://makerspet.com/blog/meet-snoopy-pet-robot-model/ including Fusion 360 source files.
Snoopy runs on https://kaia.ai software platform developed at https://remake.ai.
If you are reasonably pleased with this design, please leave a like to help others discover this contribution!
Happy 3D printing!
Snoopy was designed in Fusion 360 and printed using a Voron 2.4r2 350mm and a Prusa MK3S. It has an ESP32 micro-controller, Arduino firmware, two motors with a caster, a laser scanner sensor (and in a next revision a Raspberry Pi Pico with servos). It has an old smartphone or 7" tablet as display, microphone, audio and IMU.
Instructions and up-to-date files are available here https://makerspet.com/blog/meet-snoopy-pet-robot-model/ including Fusion 360 source files.
Snoopy runs on https://kaia.ai software platform developed at https://remake.ai.
If you are reasonably pleased with this design, please leave a like to help others discover this contribution!
Happy 3D printing!
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
