3D Printed Pinwheel

What better way to fill the city with color than these simple 3D printed pinwheels! Whether walking around a festival or decorating the sidewalks and gardens, this can add a perfect pop of color to any environment. These Pinwheels consist of entirely 3D printed parts, with no additional hardware needed. The Pinwheel is very thin, to ensure maximum flexibility and proper spin in a light breeze. Make sure your printer is properly calibrated and can produce perfect first layers. If needed, scale the Pinwheel in the Z axis by 200% to provide extra strength, but this may reduce it's ability to spin. Assembly instructions: Carefully remove the Pinwheel from the build plate It is recommended to use a thin scraper to lift the edges, then slowly and gently pull the print up. Curve each hole at the corners into the middle Thread the Screw through each hole, one at a time Tighten the Screw into the Handle until you reach the bottom of the threads Do not over tighten. Once the threads bottom out, there is no more tightening needed. If you'd like access to a Commercial License and exclusive designs not available anywhere else: Join me on Patreon!