3D Printed PLA Leaf Light

This leaf light only consists of two parts: the base, "Leaf-Light_v3", and the diffuser cover, "Leaf-Diffuser_v3". This iteration of the design is intended for LED's to face towards the user (see images for my pattern).

Notice: This was a very lackluster assembly process! Many steps were figured out midway through design and build and there is a lot of room for improvement! LOTS of soldering was involved! This page may or may not be updated with design updates!

Printing:

Parts were printed using a Prusa i3 MK3S. Depending on the filament and detail settings, the circular locking features within the model may not be reliable. User may need to supplement with double sided tape or glue.

Base - Infill is up to user preference. 20% gyroid infill with PrusaSlicer 0.15 mm QUALITY setting was used in the pictured assembly. The base will barely fit the print bed (210mm x 210mm). User will need to slice it to print on the bed diagonally and remove any brim. Support will need to be ad