3D Printed Records (Multiple)

Hello there:

I have modified the program from Instructables to 3D print many records , each record is printed on a Cubicon Single Plus 3D printer in PLA PLUS. As is takes a good two hours to process the gcode, I will include the already sliced gcode if the system lets me upload them.

This post will not just be one record but many and although I only have one right now I will keep adding STLs and gcode where possible.

To print this on the Single Plus, you need to set the resolution to 0.15, infill to 20 or 30 and the first layer at 10 mm per second, if you have to slice the program you will need a 32 GB machine (16 GB might work OK). You should use PLA PLUS as it is a little harder than PLA yet is flexible enough. PETG might work too you have to try it.

I will be slicing and preparing songs today and tomorrow to upload here.

Russ