Thingiverse
3D Printed Speakers
von selftaughtstuff
4
Downloads
15
Likes
0
Makes
https://www.youtube.com/watch?v=UqGZ5hnhjmk
Parts needed:
- PAM8610 2X10W 12V Class-D audio amplifier (https://www.aliexpress.com/item/32817238965.html?spm=a2g0s.9042311.0.0.27424c4dd4ucdM)
- AIYIMA 2" (5cm) 4Ohm 10W speaker drivers (https://www.aliexpress.com/item/33014725969.html?spm=a2g0s.9042311.0.0.27424c4dhljckG)
- 8x M3 25mm countersunk screw with nut, 5.5mm head diameter (for the front cover)
- 8x M3 25mm wood screw, 5.5mm head diameter (for the speaker driver)
- FDM 3D printer and about 400-500g filament
Parts needed:
- PAM8610 2X10W 12V Class-D audio amplifier (https://www.aliexpress.com/item/32817238965.html?spm=a2g0s.9042311.0.0.27424c4dd4ucdM)
- AIYIMA 2" (5cm) 4Ohm 10W speaker drivers (https://www.aliexpress.com/item/33014725969.html?spm=a2g0s.9042311.0.0.27424c4dhljckG)
- 8x M3 25mm countersunk screw with nut, 5.5mm head diameter (for the front cover)
- 8x M3 25mm wood screw, 5.5mm head diameter (for the speaker driver)
- FDM 3D printer and about 400-500g filament
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!