Thingiverse
3D Printed Sunglasses!
von SkalaModels
3
Downloads
5
Likes
0
Makes
This is my design for some uber cool 3D printed sunglasses.
Before you print this you must you will need:
- lenses (laser cut file attached) I made this from transparent 3mm perspex
- 2 x eyewear hinges (I bought these online)
If you have these, you are ready to make some sweet sunnies. For the front STL I split these in half using PrusaSlicer, you will need to do this unless you want to use supports. Print all parts and super glue in the perspex lenses. Print the eye patches with flexible filament for MAX comfort
For the hardware I heated up the hinges and pushed them into the arms, then super glued the other part to the main sunglasses body thing.
It fits my head, which is I would say medium sized. If not scale and fit the STL file accordingly.
Good luck!
Before you print this you must you will need:
- lenses (laser cut file attached) I made this from transparent 3mm perspex
- 2 x eyewear hinges (I bought these online)
If you have these, you are ready to make some sweet sunnies. For the front STL I split these in half using PrusaSlicer, you will need to do this unless you want to use supports. Print all parts and super glue in the perspex lenses. Print the eye patches with flexible filament for MAX comfort
For the hardware I heated up the hinges and pushed them into the arms, then super glued the other part to the main sunglasses body thing.
It fits my head, which is I would say medium sized. If not scale and fit the STL file accordingly.
Good luck!
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!