3D Printer 20mm Tool Bracket

I based this off of the 20mm 2040 aluminum extrusion that comes with the Cr-10 gantry. I made it slightly oversized in the width to compensate for the tolerance with PETG cooling. So, it came out to roughly 21mm inner width on the mounting bracket. I made it capable of holding rulers, painters knife for removing prints, side cutters for cleaning prints, and pliers for removing supports. I also added a slot to store the brush to clean the nozzle and the spray bottle with the 99% isopropyl alcohol. The one thing I didn't consider with this print is a way to hold the cleaning rag. A hook on the side might have been a nice touch.

This was designed in Inventor as a part file, then converted to an STL to print.