Thingiverse
3D printer enclosure fully printed
door Gxrkensalat
504
Downloads
845
Likes
2
Makes
please consider downloading it from Makerworld so I can get free filament :)
https://makerworld.com/en/models/228653
modular version:
https://makerworld.com/en/models/228666#profileId-361206
3D printer enclosure 600 x 700 x 760 mm
when printing ASA I get 30 °C in the enclosure at 20 °C room temperature
You need following screws/nuts
74 x nut m3 ISO 4032
47 x allen screw m3 x 6 ISO 4762
20 x allen screw m3 x 10 ISO 4762
2 x allen screw m3 x 12 ISO 4762
5 x allen screw m3 x 16 ISO 4762
2 x allen screw m4 x 25 ISO 4762
the panels are greenhouse polycarbonate panels you need two 980x2000x4.5 mm plates (you can cut them with a knife)
If you print everything you need approximately 1.5 Kg of PLA
For the hinges i recommend using ABS/ASA
https://makerworld.com/en/models/228653
modular version:
https://makerworld.com/en/models/228666#profileId-361206
3D printer enclosure 600 x 700 x 760 mm
when printing ASA I get 30 °C in the enclosure at 20 °C room temperature
You need following screws/nuts
74 x nut m3 ISO 4032
47 x allen screw m3 x 6 ISO 4762
20 x allen screw m3 x 10 ISO 4762
2 x allen screw m3 x 12 ISO 4762
5 x allen screw m3 x 16 ISO 4762
2 x allen screw m4 x 25 ISO 4762
the panels are greenhouse polycarbonate panels you need two 980x2000x4.5 mm plates (you can cut them with a knife)
If you print everything you need approximately 1.5 Kg of PLA
For the hinges i recommend using ABS/ASA
Gxrkensalat publiceert ook op
63 extra modellen op 2 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
