3D Printer Enclosure

This is a corner bracket designed for building a 3D-printer enclosure that is easy to disassemble and can be opened from any side. It helps an already enclosed printer maintain a higher chamber temperature and filters out toxic fumes without letting heat escape.It also reduces noise significantly. If you don’t install a fan and leave it fully sealed, you can barely hear the printer running — and even with the fan, it is still much quieter.Parts needed24 × M5 nuts24 × M5 × 30 mm bolts12 × timber pieces — 480 mm (L) × 34 mm × 34 mm6 × MDF panels — 550 mm × 550 mm × 18 mmOptionalSound/heat insulation sheet — 2 m × 1 m × 20 mm (cut to size)120 mm fanActivated carbon filterHEPA filterInstructionsIf you don’t have the right tools, get the timber and MDF professionally cut to size.You can use the printed corner piece to mark and drill the M5 bolt holes in the MDF sheet.The fan opening is 127 mm, and the fan mount and filter are designed for that size.Drill extra holes for the power cable and