Thingiverse
3D-printer vent kit
por kjelltec
1.4k
Descargas
866
Likes
0
Makes
This is parts i made to ventilate my 3d-printer. Its made to fit a 100mm dia vent hose. It uses a big swivel nut which let you alternate between connecting your 3d printer to the outside or a regular vent valve.
On the wall mount you either thread on the hosepart or the rosette valve.
******************************************************************************************************
*Update 2021-12-31*
People have been asking me how to print this stuff. I've now reduced the number of files and also changed the description below to make it easier.
******************************************************************************************************
1. there is two different wall mounts one circular and one square, choose the one you prefer. For most people the square one is probably the way to go.
2. Print hose_complete with the nut facing down. Print with supports but set the support angle to at least 62 degrees. You don't want to get support material in the threads.
On the wall mount you either thread on the hosepart or the rosette valve.
******************************************************************************************************
*Update 2021-12-31*
People have been asking me how to print this stuff. I've now reduced the number of files and also changed the description below to make it easier.
******************************************************************************************************
1. there is two different wall mounts one circular and one square, choose the one you prefer. For most people the square one is probably the way to go.
2. Print hose_complete with the nut facing down. Print with supports but set the support angle to at least 62 degrees. You don't want to get support material in the threads.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!