3D-scanner markers

System of objects for 3D scanner markers. All figures have shallow cutouts for 6 and 10 mm markers (8 and 12 mm cutouts). The cutouts allow the markers to stay in place longer, since they do not catch on the edge during storage. The cutouts for markers on the objects are located in different places: there are 8 different hemispheres, 6 different columns, 6 different large tops.

The columns and 50 mm bases have internal cavities for 20x15x2 mm magnets. In the print profile of the columns and 50 mm bases, a pause is made, during which you need to install the magnets in the slots. After the pause, the cavities will be closed.

Corner markers, marker towers and one set of the hemispheres mast be printed in one colour (I prefere black). All other objects must be printed in another colour (I prefere white).

All parts have holes for 5x2 mm cylindrical magnets. This allows you to connect parts to each other, make high markers, attach them to iron parts or an iron table for scanning. The he