3D Surface Keychains - Solo Leveling Shadows

Please do not scale the height of this design Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 100x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.5mm and the Actual Depth is 2.5mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Basic Jade White Transmission Distance: 8 PLA BambuLab Basic Red Transmission Distance: 4 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Ice Blue At layer #13 (1.12mm) swap to Jade White At layer #16 (1.36mm) swap to Red At layer #20 (1.68mm) swap to Jade White for the rest.