Thingiverse
3dpBurner2 voltage/current Meter
por villamany
221
Descargas
142
Likes
2
Makes
Simple box for a voltage/current meter. I designed this for the 3dpBurner2 3D printed laser cutter/engraver ( http://www.3dpburner.blogspot.com ), but it can be used for any other project.
Print on STL position without supports. I use it on the 12v main power line. I dont like the idea to use on the laser side due the meter can contain capacitors and could spikes the diode.
It´s ready to be fixed by using M3 stuff, double side tape or hot glue (i use double side foamy tape).
The meter i used comes with thin red and black wires and thick red, black and yellow wires.
See pictures for assembling (on some others the yellow wire comes blue instead).
Take care, usually there are two meter types with similar aspect, one for direct measuring 0-10A (this one) and another for measuring 10-100A where an external shunt is a need (not suitable for 3dpBurner consumption
Print on STL position without supports. I use it on the 12v main power line. I dont like the idea to use on the laser side due the meter can contain capacitors and could spikes the diode.
It´s ready to be fixed by using M3 stuff, double side tape or hot glue (i use double side foamy tape).
The meter i used comes with thin red and black wires and thick red, black and yellow wires.
See pictures for assembling (on some others the yellow wire comes blue instead).
Take care, usually there are two meter types with similar aspect, one for direct measuring 0-10A (this one) and another for measuring 10-100A where an external shunt is a need (not suitable for 3dpBurner consumption
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!