Thingiverse
3Dsnowflake
by Smoutech
115
Downloads
96
Likes
1
Makes
Hopefully just in time for Christmas ... A slot together 3Dsnowflake ornament. This is my digital version of John A Nelson's scrollsaw pattern.(Approval gained). Dimensions: 111 x 111 x 111 mm.
It is designed to be laser cut from 3mm Acrylic or MDF. Though I have also successfully cut it from 3.2 mm hardboard and plywood. That would be 1/8 inch. Due to the kerf width and shrinkage the 3mm acrylic version required glueing. In the UK we often use Tensol cement. Superglue would deposit a fine white mist. 3.2 mm hardboard allowed a (difficult) press fit.
The files were designed in Pro/Desktop, saved as DXF and imported into Techsoft 2D Design, both widely used in UK secondary schools, then lasercut. You can download both versions. You can also download the files for a corrugated cardboard frame so you can send the 3D snowflake in the post as flatpack self-assembly ornament.
The images show some renderings and photographs of the actual thing. The one with the shadow is frosted. I spray
It is designed to be laser cut from 3mm Acrylic or MDF. Though I have also successfully cut it from 3.2 mm hardboard and plywood. That would be 1/8 inch. Due to the kerf width and shrinkage the 3mm acrylic version required glueing. In the UK we often use Tensol cement. Superglue would deposit a fine white mist. 3.2 mm hardboard allowed a (difficult) press fit.
The files were designed in Pro/Desktop, saved as DXF and imported into Techsoft 2D Design, both widely used in UK secondary schools, then lasercut. You can download both versions. You can also download the files for a corrugated cardboard frame so you can send the 3D snowflake in the post as flatpack self-assembly ornament.
The images show some renderings and photographs of the actual thing. The one with the shadow is frosted. I spray
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!