MakerWorld
Electronics
Voir le modèle
3FT LED Tower Lamp
6
Téléchargements
5
Likes
1
Makes
I've made many led lights, most all the designs from here. This is one that's similar to others, but BIGGER :D Go big or go home right? quick video of it running - This was printed on a Kobra Max (410x410x450) originally so the large ring was one solid piece in photo. I split it up in pieces to fit smaller printers. The diffusors on this are 350mm tall each. This can be easily resized for height, you will just need more connectors.Printing instructions. Diffusors are PetG…printed in VASE MODE, with a BRIM, using a at least a .8mm nozzle and whatever speed gives you your desired opacity. I did 35mm\sec and got very clear, so i increased to 45mm\sec and got what you see. The diffusor model is 2mm wide. and the slot for the diffusors (base, connector and lid) are 2mm wide to accommodate elephant foot (from brim) and expansion. Do not use a smaller nozzle in vase, or the diffusor will be too thin and will move around or break easily. If your machine is smaller Z axis, resize in Z o
Badkitty publie également sur
22 modèles supplémentaires sur 2 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !