3inch cinewhoop

this is a 3 inch cinewhoop that i designed before i remembered i hate pushers. i thought id chuck it on thingy so someone might enjoy it :)

top plate and arms are to be cut in 2mm carbon fiber

theres two versions of the top plate. one takes m2 press nuts ( https://betafpv.com/products/m2-clamping-nuts ) the other regular m2 nuts.

the arms are secured with (8x) 10mm-12mm m2 hex bolts. theres 2 versions of the arms. one for 9x motor pattern and one for 12x motor pattern.

the wall is sandwiched between the top plate and the arms then you connect that with (4x) 15-20mm m3 nylon standoffs depending on how tall your motors are. you will need (8x) 10-12mm m3 bolts.

to connect the canopy use (2x) 6-10mm m2 bolts at the front and the back one gets attached by the m3 bolt that is used for the front nylon standoff. you will have cut 2mm off the front standoff to keep everything level as the standoff sit on top of the canopy to secure it. the canopy was designed around the caddx