3S (simple, small, study) PC4-M10 case mount

Most PC-M10 adapters / case mounts are bulky and feature 3D printed bolt+nut combinations. This simple, small and sturdy solution leverages the bowden adapter's own thread (M~10/0.9pitch) to clamp down the parts. These adapters are useful on for cereal / storage filament dry boxes that have a PTFE feed to an AMS or directly to your printer. Instructions:Drill 14mm hole in the casePress fit PC4M10 into the outer partFit the combined part into the case hole.Screw on the rear nut A ~14mm rubber washer or o-ring can be fit around the shaft to improve the seal.