3x3 Grid Button Clicker 19g!!!

3x3 Clicker! Mechanical Fidget Toy 🎮 Welcome to the official download page for the 3x3 Clicker! This pocket-sized fidget toy is designed to mimic the crisp, satisfying feel of a mechanical computer keyboard. It features a solid grid base and 9 individual key caps that pop right into place. This model is fully optimized for multicolor printing using separate plates. You do not need a multi-material system like an AMS because you can print the base in one color and the buttons in another! Key Features ✨ Pocket-Sized Fun: Easy to carry around to school, camp, or keep on your desk at home. Super Filament Saver: The entire project uses less than 22 grams of plastic filament. That means you can make it using tiny leftover scraps from your older projects! Fast Printing: You can go from downloading the file to holding the finished toy in under 2 hours. Detailed Print Specifications ⚙️ These settings are pre-configured to give you the smoothest possible button movement and a beautiful surface finish. Setting NameRecommended ValueWhat it DoesLayer Height0.12mm High QualityMakes the print lines nearly invisible.Infill Density15%Keeps the inside lightweight but sturdy.Infill PatternGyroidA wavy internal structure that prevents breaking.Outer Wall Speed60 mm/sSlows down the outside layer for a perfect look.Bed AdhesionBrim (Auto)Helps the small key caps stick tightly to the plate. Print Plate Breakdown 📊 The project is split into two plates so you can easily customize your colors. Plate 01: The Base Part What prints: 1 main keyboard base frame. Filament used: 9.35 grams (3.09 meters). Print time: 42 minutes (including printer warmup). Best color choice: A dark color like black, grey, or navy blue to make the buttons pop. Plate 02: The Key Caps What prints: 9 individual mechanical key caps. Filament used: 12.07 grams (3.98 meters). Print time: 1 hour, 25 minutes (printed all at once). Best color choice: Bright colors like red, neon green, or glow-in-the-dark plastic! Quick Asse