Thingiverse
3x5 microSD Card Case
by Jeffeb3
23
Downloads
14
Likes
0
Makes
dadhoc made these, and I found them, over two years ago! Well, I finally decided that these just had to be made in a microSD size. I took measurements from his STL, and recreated a space for a microSD instead of the big size.
I recommend printing some of the larger ones too, so you have some storage for the adapters.
I managed to print these as oriented, with a 5mm rim and a 0.4mm nozzle at 0.2mm height. The overhand on the window always sucks, but it can be trimmed with a knife, and it's not too bad to begin with.
I recommend printing some of the larger ones too, so you have some storage for the adapters.
I managed to print these as oriented, with a 5mm rim and a 0.4mm nozzle at 0.2mm height. The overhand on the window always sucks, but it can be trimmed with a knife, and it's not too bad to begin with.
Jeffeb3 also publishes on
47 additional models across 1 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
