Thingiverse
3x5x5
by kequals
90
Downloads
69
Likes
2
Makes
UPDATE 7/30/18: Adjusted tolerances and made corners thicker. They shouldn't be as fragile now.
A 3x5x5 twisty puzzle. It is fully functional, so it can also shapeshift.
To make, print each part by the number indicated on the filename.
You need 6 M3 screws and 6 springs. You can buy them here:
https://thecubicle.us/moyu-weilong-hardware-p-1666.html
Due to the mechanism cutting very close to the top and bottom, there isn't any room for top center caps. Make sure the screw isn't protruding and place a 4x4 sticker directly over the hole. It should cover the hole completely.
The the 3x5 sides use 62mm 4x4 stickers, and the top and bottom stickers can be cut from the template.
A 3x5x5 twisty puzzle. It is fully functional, so it can also shapeshift.
To make, print each part by the number indicated on the filename.
You need 6 M3 screws and 6 springs. You can buy them here:
https://thecubicle.us/moyu-weilong-hardware-p-1666.html
Due to the mechanism cutting very close to the top and bottom, there isn't any room for top center caps. Make sure the screw isn't protruding and place a 4x4 sticker directly over the hole. It should cover the hole completely.
The the 3x5 sides use 62mm 4x4 stickers, and the top and bottom stickers can be cut from the template.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!