Slicer Discord
4-color HueForge Predator – 3D-Druckmodell von MakerWorld MakerWorld
2D Art

4-color HueForge Predator

154 Downloads
96 Likes
67 Makes
Zum Modell
All the designs i upload, i have to print first, and that's a lot of filament 😬 And filament isn't free..So, if you like my work you couldbuy me a coffee if you like. 😉https://www.buymeacoffee.com/a.vdh_83 Or a donation via Paypal is also much appreciated.https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BumbuLab Matte Charcoal Transmission Distance: 0 PLA BambuLab Basic Brown Transmission Distance: 0.8 PLA BambuLab Basic Yellow Transmission Distance: 4 PLA BambuLab White Transmission Distance: 9.6Swap Instructions: Start with Matte Charcoal At layer #11 (0.96mm) swap to Brown At layer #14 (1.2mm) swap to Yellow At layer #16 (1.36mm) swap to White for the rest.
Kategorie
2D Art
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen