4 in 1 PTFE Adapter

Here you can find a PTFE 4 in 1 adapter that can replace the original Bambulab adapter. The adapter can be used either before or after the AMS Buffer. For example, the AMS hub can be avoided or several filaments can be fed manually after the buffer. The adapter is available for PC4-M10 and PC4-M8 fittings. Check what you still have or have ordered before you print the part ;) Assembly: The fittings are simply screwed in place. The PTFE tubes are then pushed in all the way to the end. Please make sure that the tubes are really pushed in as far as they will go to prevent increased wear or filament routing problems. Parts required for version: (after buffer)5x PC4 M10 or M8 fitting1x M3 x 8mm screw1x PTFE tube (40mm long) Parts required for version (before buffer)5x PC4 M10 or M8 fitting1x M3 x 8mm screw1x PTFE tube (120mm long)