4" PVC Wall Bracket

First thing I've tossed up here on this website, and very new to 3D modeling and 3D printing, so apologies if there's something inherently wrong for the design. That said, it's working great for my needs.

Needed a 4" pvc wall bracket and standoff. The current offerings hold the pipe flush to the wall, but having French cleats on the wall this gave it no room for a hose fitting, so this holds the print off the wall about an inch. This size should work with most 4-6" hose clamps, but definitely double-check the width of your clamps vs the opening.

when you wall mount, you'll want to use a screw that doesn't have a terribly thick head on it or you'll have a rough time getting the hose clamp past the screw in that channel.

The hose clamps I used were marked 304 91-114 if that helps!

I'm using 4" Triplewall Drain Pipe from Home Depot for my dust collection. If you're using schedule 40 make sure you've got plenty long hose clamps as it's a bit thicker than what I'm using.