Thingiverse
4-stroke Compressed Air Engine
by AxelDayton
185
Downloads
181
Likes
0
Makes
This Is my fully functioning 4 stroke compressed air engine! It works very similar to every other, except it is a 4 stroke. Everything exept the head gasket can be printed in PLA, the head gasket was designed for NinjaFlex. If you don't have ninjaflex, just use 1mm thick gasket material.
Parts List:
- 1 6mm Ball Bearing
- 1 8.1mm x 5.6mm x 1.8mm O-ring
- 2 7mm x 22mm x 8mm Ball Bearing
- 2 5mm x 16mm x 5mm Ball Bearing
- 1 M3 x 10mm Machine Screw
- 8 M3 x 20mm Machine Screws
- 1 800 and 1200 grit sandpaper
- 1 19.8mm x 22mm x 2.4mm O-ring
- 1 2L bottle
- 1 Tubeless Presta Valve
- 12 5mm Nuts
- 1 Super Glue (to glue the jug and crankcase)
Build and Test Video:
https://youtu.be/1UAs45Ae-gA
If you want to see more projects like this, please consider subscribing!
https://www.youtube.com/axeldayton
Parts List:
- 1 6mm Ball Bearing
- 1 8.1mm x 5.6mm x 1.8mm O-ring
- 2 7mm x 22mm x 8mm Ball Bearing
- 2 5mm x 16mm x 5mm Ball Bearing
- 1 M3 x 10mm Machine Screw
- 8 M3 x 20mm Machine Screws
- 1 800 and 1200 grit sandpaper
- 1 19.8mm x 22mm x 2.4mm O-ring
- 1 2L bottle
- 1 Tubeless Presta Valve
- 12 5mm Nuts
- 1 Super Glue (to glue the jug and crankcase)
Build and Test Video:
https://youtu.be/1UAs45Ae-gA
If you want to see more projects like this, please consider subscribing!
https://www.youtube.com/axeldayton
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!