4-way hat switch

I based this design on Acel-sim's 4-way hat switch. I wanted a smoother and tighter action to use it as an 8-way switch to control a search light in my flight sim collective (by PC_PILOT).
I'm using the 15 for $3 6x6x4.3mm through hole switches from eBay.
After printing the shaft put it in a drill to spin it while you hold sand paper on the sphere end to take out the printing ridges. Not too much.

Works great! Cudo's to Acel-sim for his original design.

I've made the switch shorter to better fit in switch boxes and controllers. I also redesigned the top.