Slicer Discord
4040 Extrusion End Hinge – 3D-Druckmodell von Thingiverse Thingiverse
4040 Extrusion End Hinge – Bild 1 4040 Extrusion End Hinge – Bild 2 4040 Extrusion End Hinge – Bild 3 4040 Extrusion End Hinge – Bild 4 4040 Extrusion End Hinge – Bild 5 4040 Extrusion End Hinge – Bild 6
Tools

4040 Extrusion End Hinge

von jwalker88 · Tools
439 Downloads
306 Likes
0 Makes
Zum Modell
This is an end hinge for 4040 aluminum extrusion profiles. The hinge is comprised of two parts: "1" and "2". One of each part must be printed in order to complete a single hinge. The extrusion center hole must be tapped M8.

Hardware necessary:

McMaster Carr - 92855A716 - M8x16 Low Profile Socket Head Screw - QTY 2
https://www.mcmaster.com/92855a716/

McMaster Carr - 91292A142 - M6x40 Socket Head Screw - QTY 1
https://www.mcmaster.com/91292A142/

McMaster Carr - 90576A115 - M6 Lock Nut - QTY 1
https://www.mcmaster.com/90576A115/

McMaster Carr - - M6 Oversized Washer - QTY 1
https://www.mcmaster.com/91100A150/

Assembly:
Once the extrusions are tapped and the hinge parts are printed, use the low profile socket head M8 screws to fix the hinge parts to the extrusions. Then use the M6 hardware to secure the two halves of the hinge together.
Kategorie
Tools
Quelle
Thingiverse
Veröffentlicht
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen