Thingiverse
Nexstar 5SE solar filter
by Doranku
9
Downloads
10
Likes
0
Makes
A solar filter for a Celestron Nexstar 5SE.
Get a sheet of Baader Planetarium AstroSolar solar filter 20 x 29 cm.
After printing you'll only need to sand a possible flatfoot of the inner ring.
Draw and cut is a little bigger than the inner ring. Place it on the outer ring and insert the inner ring into the outer one. If you are happy with the setup, glue the rings together. I used ABS and acetone to seal both parts.
Print the protection if you want to avoid ripping the filter.
And
Get a sheet of Baader Planetarium AstroSolar solar filter 20 x 29 cm.
After printing you'll only need to sand a possible flatfoot of the inner ring.
Draw and cut is a little bigger than the inner ring. Place it on the outer ring and insert the inner ring into the outer one. If you are happy with the setup, glue the rings together. I used ABS and acetone to seal both parts.
Print the protection if you want to avoid ripping the filter.
And
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in