Thingiverse
5.25" Bay Adapter for 3.5" and 2.5" HDD
by morganlowe
38
Downloads
33
Likes
0
Makes
I made this for my cloud server which is a SFF HP machine with not much space for hard drives.
It will hold one standard 3.5" HDD and one standard 2.5" HDD. If your 3.5" HDD is over 26mm thick you may struggle to get a standard 9.5mm 2.5" HDD in there with it, but it serves my purpose!
Print face down with no support. It's designed to print with no support and plenty of ventilation.
It uses standard screws to mount the drives. The material at the screws is 2mm thick so no need for ext
It will hold one standard 3.5" HDD and one standard 2.5" HDD. If your 3.5" HDD is over 26mm thick you may struggle to get a standard 9.5mm 2.5" HDD in there with it, but it serves my purpose!
Print face down with no support. It's designed to print with no support and plenty of ventilation.
It uses standard screws to mount the drives. The material at the screws is 2mm thick so no need for ext
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in