Cable Chain Mounts for 10mm x 15mm Drag Chain

This is modification I did to the direct drive mount for the BLV to enable me use cable chain. I wanted something which will make enclosing the printer very easy.

For the cable chain on the Y axis, I drilled a hole about 1/4 away from the edge closer the bed. I wanted to make sure the chain does not interfere with the belts.

This is a [link](https://www.amazon.com/gp/product/B07K8SW2S5/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1) to the chain I used.

I used most M3 screws to mount