Slicer Discord
40k Scoreboard – 3D printable model from MakerWorld MakerWorld
Other Toys & Games

40k Scoreboard

250 Downloads
152 Likes
224 Makes
Go to Model
Scoreboard for 40k using snapping scroll wheels. Keeps track of victory points (both primary and secondary), Command Points (CP), and battle round. This design uses number wheels that will ‘snap’ gently to center numbers, and is 100% printed (no extra hardware required). Assembly is straight forward: 6 wheels on one axel for the top half 5 wheels on the other axel for the bottom half Axels snap in by sliding in on the right first (may need to push two of the scroll wheels all the way to the right to fit in before sliding in the axel), then pushing down until they click in. Panel snaps in with some force, but once it pops in it's nice and secure. Note: Make sure the wheels are lined up before pushing in the axels or putting on the panel - the wheels are easy to damage if they're forced down on the axel. Enjoy!
Category
Other Toys & Games
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Single piece Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection