Thingiverse
40mm trip mine
par d4yl33
9
Téléchargements
7
Likes
0
Makes
once you have printed off you will need 4x 3mm X 10mm dome alan bolts to hold the firing pin supports then a 2mm thick pin, i used a 2mm drill bit and cut it down this holds the firing pin to trigger.
also need a 5mm bolt and nut to hold the trigger to support. once you put your 40mm grenade in the long tube put it to the main holder and hold both parts together with a 5mm thick o-ring size is down to you as tighter the better then add fishing line to the trigger then feed the line through hole below the trigger and make it as long as you like and then tie it off on the other pin and stick both into the ground and when someone trips on line the 40mm grenade goes off and you get your kill.
happy printing
update to single stl files so you can print anything off singley if you should brake anything
last update 2nd jan 2019
also need a 5mm bolt and nut to hold the trigger to support. once you put your 40mm grenade in the long tube put it to the main holder and hold both parts together with a 5mm thick o-ring size is down to you as tighter the better then add fishing line to the trigger then feed the line through hole below the trigger and make it as long as you like and then tie it off on the other pin and stick both into the ground and when someone trips on line the 40mm grenade goes off and you get your kill.
happy printing
update to single stl files so you can print anything off singley if you should brake anything
last update 2nd jan 2019
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !