REMIX Time Lapser

V.2 New Base with threaded hole for 1/4" tripod screw

I made a GoPro Timer Lapser by PrintFail with excellent results. Congratulations and my gratitude.

I made a remix, as follows:

Base.stl - I have widened the 608 bearing support. Also a 6 mm hole in the bottom to fix tripod 1/4" screw

Engrenagem_peq.stl . Hexagonal hollow to fit an hex-head M5 x 10 mm bolt to wind/unwind the clock. The winding device is built with bolt, cap nut and M5 Knob Long.

Engrenagem_grd.stl - Straightened