Slicer Discord
45% Scale Working V6 Engine – 3D-Druckmodell von Thingiverse Thingiverse

45% Scale Working V6 Engine

von 8bitmcu
0 Downloads
0 Likes
0 Makes
Zum Modell
Working V6 engine, scaled down to 45%, perfect for display models. No glue required, but it's a tough print and metric hardware is required for assembly.
Required Hardware

- 6x [M2x6mm](https://s.click.aliexpress.com/e/_c3BS2d0V) flat-head screws
- 4x [M2x16mm](https://s.click.aliexpress.com/e/_oBZ2rUh) screws
- [Super Lube](https://amzn.to/4cQyhgK) (optional)

#### Print Settings

You will want to try and **print engine-shaft-rods.stl first**, it is by far the hardest part to print as 90%+ of it sits on supports. You will want to carefully paint on support so none of them are sitting on top of the shaft. See attached photo for how support should look like. Once printed and cleaned, you need to get it running smooth, see assembly video. I also recommend using a brim on engine-block-a.stl and engine-block-b.stl

General Print Settings for all the .stl files

- 0.15mm layer height (or better)
- 4 perimeters, 15% infill
- PLA or PETG
- All files can be printed in the orientation they c
Quelle
Thingiverse
Was du zum Drucken brauchst: Fortgeschritten Niedrige Konfidenz
Warum?
0.15mm Schichten · aufwändige Nachbearbeitung
Hardware nötig
Supports 1/3
Zusammenbau 2/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 3/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA, PETG
Schichthöhe
0.15 mm
Nachbearbeitung
Bemalen, Schleifen, Kleben, Hardware
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

8bitmcu veröffentlicht auch auf

41 zusätzliche Modelle auf 2 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen