Thingiverse
450 Drone Quadcopter Behemoth
door 3dprinting_germany
72
Downloads
63
Likes
0
Makes
I designed this DJI 450 inspired 3D printable version, because I had printed the design of @villamany and had many trouble with it, especially with broken pieces and no consistent flight behaviour, so I decided to take the DJI F450 Design and make it a Behemoth, so even the 3D printed parts have maximum strength but yes, they are a little bit heavier.
https://youtu.be/-CmQ_CUXsfw
What you need to print:
- 4x ARM
- 1x BASE
- 1x TOP
- 2x LEG
- 1x FCSM
What you could print if you've got same parts:
- 1x GPS
- 1x BC
- 1x BVC
What you need to have: ( I use )
- 2x Motor CW with d=16/19mm drilling M3 ( 2216 810kV )
- 2x Motor CCW with d=16/19mm drilling M3 ( 2216 810kV )
- 4x ESC ( 30A )
- 1x PTB ( Matek PDB-XT60 )
- 1x FC ( F3 10DOF Deluxe )
- 2x Propeller CW ( 9450 / 1045 )
- 2x Propeller CCW ( 9450 / 1045 )
- 1x Receiver ( Taranis X8R )
- 4x Gimbal Damper ( 60g )
- 1x Transmitter ( Taranis Q X7 )
- 1x Battery 3-4S ( 3S 3500mAh )
- 1x Battery Strip ( B
https://youtu.be/-CmQ_CUXsfw
What you need to print:
- 4x ARM
- 1x BASE
- 1x TOP
- 2x LEG
- 1x FCSM
What you could print if you've got same parts:
- 1x GPS
- 1x BC
- 1x BVC
What you need to have: ( I use )
- 2x Motor CW with d=16/19mm drilling M3 ( 2216 810kV )
- 2x Motor CCW with d=16/19mm drilling M3 ( 2216 810kV )
- 4x ESC ( 30A )
- 1x PTB ( Matek PDB-XT60 )
- 1x FC ( F3 10DOF Deluxe )
- 2x Propeller CW ( 9450 / 1045 )
- 2x Propeller CCW ( 9450 / 1045 )
- 1x Receiver ( Taranis X8R )
- 4x Gimbal Damper ( 60g )
- 1x Transmitter ( Taranis Q X7 )
- 1x Battery 3-4S ( 3S 3500mAh )
- 1x Battery Strip ( B
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
