Compound Bow Center Shot Laser Alignment Tool

This assembly is used to help set the center shot on a compound bow.
To complete this assembly the following is needed:
Hardware:
4 - 10-24 countersunk head x 1.5" in length
2 - M6 Washers
1 - M6 Nylock Nut
2 - M6 Standard Nuts
2 - 10-24 Nuts
1- M6 Hex Head bolt 60mm to 70mm in length
Printed Parts:
1 - Riser_Mount.stl ( 1 nut is inserted during this print)
1 - Laser_Clamp_Outer.stl
1 - M6 Knob ( 1 nut is inserted during this print)
1 - Laser_Clamp_Base.st