4BAY10INRACK

This is a 4 bay 2.5 drive bay made for the ZimaBoard or Zimaboard 2. I used PETG filament. This allowed me to add four drives to my original set up. Used upgraded power supply with splitter to power Zimaboard with 2 drives and SATA Adapter with 4 drives. Added a switch to power drives up or down separately. This is my parts list for this project. ZIMA PCIe to Port SATA III Adapter 120 12v/10A GaN Power Adapter for Zimaboard &Zimaboard 2 2 #6-32x6 screws to mount adapter Carling Technologies Curvette Rocker Switch RA901-VB-B-9-V | SPST ON-Off | 10A 250VAC / 16A 125VAC | Black/Red ActuatorDC5525 Y-Splitter Cable 18AWG DC 5.5mm X 2.5mm Straight Female to Double Right Angle 90 Degree DC 5.5mm X 2.5mm Male Extension Power Cable4FT DC 5.5MM x 2.5MM Male and Female Plug to Bare Wire Open End Power WireDC5525 to IDE 4 Pin Power Supply Cable DC 5.5x2.5mm Female to LP4 IDE 4 Pin Female Extension Cable<a