4L80E Bushing Driver Set

This is a bushing driver set I modeled for installing 4L80e bushings. The ID fits snugly into the bushing, the small ridge (if applicable) recesses the bushing to the proper depth, and the largest portion is designed for use on a press. I used these to install my bushings during 2 rebuilds, so they have limited testing. Use at your own risk. NOTES: These are plastic tools being used on a press. The tool can and will fail. Use at your own risk; if it fails, print a stronger one. I intended to use them once and print another one if I needed to. These need to be printed with at least 6 walls and 6 bottom layers at 50% infill. If yours breaks, try increasing the walls or the bottom layers, depending on the cause of the failure. Use something to distribute the pressing force across the entire surface…. If you push only in the middle and rely on the infil to support the pressure, it will fail.I only use the extra-wide front stator bushings, so the tool in this set is intended for that bushin