Thingiverse

4max Pro Tool Holder Remix

by timpmandan

20 Downloads

9 Likes

0 Makes

Remix of the 4Max(Pro) Tool Holder by Addinator.

Added 2 spots for the screwdriver and 5th hex wrench, hole for a utility knife or pencil, and an angled bottom on the putty knife slot to straighten that out.

Printed at 10% with a brim and no support on the 4Max Pro. Tool about 8 hours.

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

8 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does 4max Pro Tool Holder Remix need supports when printing?

No supports needed for 4max Pro Tool Holder Remix — it's designed to print clean off the bed.

How long does it take to print 4max Pro Tool Holder Remix?

According to the design notes, 4max Pro Tool Holder Remix takes approximately 8 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is 4max Pro Tool Holder Remix available in?

4max Pro Tool Holder Remix is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is 4max Pro Tool Holder Remix free to download?

Yes, 4max Pro Tool Holder Remix is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

4max Pro Tool Holder Remix

Add to Collection