Thingiverse
5.25 3.5 Computer Drawer
by Dirgesan
115
Downloads
82
Likes
0
Makes
Warning! These are very, very long prints. I originally made these a year or two ago to see how large of a print I could make on my FFCP and they've been my "kitchen drawer" on my computer ever since. Nowadays I find complete computer drawers selling on EBay or Amazon for a pretty low price but I didn't see any when I made these. I figured I'd finally post these in case anyone wants to make their own.
The dimensions, in millimeters (which I got from a CD-ROM drive) are as follows:
DrawerBox 150 x 146 x 41
Drawer 150 x 139 x 36
Front 148 x 42 x 3
3.5 DrawerBox 105 x 101 x 25
3.5 Drawer 103 x 96 x 20
3.5 Front 101 x 25 x 3.5
The screw holes in the Drawer and Front are centered on the DrawerBox, with 3 inch spacing to allow the use of a standard drawer pull sold at local hardware stores. For the 3.5 drawer the holes have 2 inch spacing. I had to build my own.
What is nice about these prints is that you can build your own
The dimensions, in millimeters (which I got from a CD-ROM drive) are as follows:
DrawerBox 150 x 146 x 41
Drawer 150 x 139 x 36
Front 148 x 42 x 3
3.5 DrawerBox 105 x 101 x 25
3.5 Drawer 103 x 96 x 20
3.5 Front 101 x 25 x 3.5
The screw holes in the Drawer and Front are centered on the DrawerBox, with 3 inch spacing to allow the use of a standard drawer pull sold at local hardware stores. For the 3.5 drawer the holes have 2 inch spacing. I had to build my own.
What is nice about these prints is that you can build your own
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!