5" Vise Soft Jaws

###Overview:
This design is for a 5" wide set of magnetically fixed vise soft jaws.

###Revisions:
Initial Release - September 6, 2020

###Details:
This 5 inch (127mm) wide soft jaws design includes several geometric features in order to clamp various objects in different orientations. Current design is sized to use a 0.78" X 0.20" (20 X 5mm) round magnet, which can be epoxied into place. The design also includes an undercut feature for the magnet location, to allow the epoxy to provide a mechanical bond to the jaws if printed in PETG.

###Parts Needed:
- Filament :|
- [Magnet](https://www.amazon.com/Boston-Ceramic-Ferrite-Magnets-bulk/dp/B01N31H4XV/ref=sr_1_15?dchild=1&keywords=.75%22+magnet&qid=1599409360&sr=8-15)
- Two Part Epoxy of your choice

###Print Settings:
*ABS*
- Recommended: Not Ideal, but will work
- Perimeters: 3
- Infill: 30%
- Supports: No

*PETG*
- Recommended: Yes
- Perimeters: 4
- Infill: 50-70%
- Supports: No

*PLA*
- Recommended: