H-250 Quadcopter Quad Copter

H-250 Quadcopter Frame
Consists of 4 arms - I use ZMR 1804-2400kv motors or similar and 5030 props - could possibly fit 6 inch props.
A 3 part frame consisting held together by nylon hex stand off spacers from Ebay.
The middle frame section has slightly longer middle lugs to accommodate the flight control board - KK2 fits nicely using a KK2 3D printed case.
2 x Landing Gear a slot in the grooves on the bottom section - nice snug fit, however could be fixed with hot melt glue if required